Tel: +86 15153112367   E-mail:

About   Contact    |    


Trade News

How to select the ozone generation system for sterilization and disinfection of swimming pool water

Ozone is an internationally recognized green and environmentally friendly fungicide, with thorough sterilization, no residue, and no secondary pollution. The technology of using ozone generation systems for sterilization and disinfection of swimming pool water is very mature and widely used in Europe, America, and internationally. So how should the ozone generation system used for sterilization and disinfection of swimming pool water be selected? Max Ozone will answer for you.

Firstly, it is necessary to determine the size of the ozone system, which is the ozone output of the ozone generator. Ozone generator output (g/h)=circulating water flow rate (m3/h) x ozone dosing concentration (g/m3). Volume of reaction tank (m3)=circulating water flow rate (m3/h) x percentage of side flow water (%) x reaction time (h)

Secondly, selecting an ozone generation system for the swimming pool also requires determining the size of the jet generator. The size of the jet device can be calculated and determined based on the flow rate of side water, inlet and outlet water pressure, and the air flow rate required for the ozone generation device.

In addition to the above two points, the selection of ozone generation system for swimming pool water also involves factors such as CT value and ORP controller, which is a highly technical and professional work. If you want to use an ozone generation system to disinfect and sterilize swimming pool water, Max Ozone recommends contacting professional technical personnel for selection issues.


Leave a Reply

Leave a message